Molded connectors and quick disconnects by Remke

Molded Connectors Aren’t All the Same, Learn More About These Important Products

1] Extreme Environments Demand Tough Molded Connector Materials

5 Things to Know about Molded Connector Construction by Remke IndustriesCorrosion, abrasives, liquids, heat, cold and stress from constant motion are all factors to consider when choosing a molded connector for your application.

No matter how demanding, the right molded connector materials will make all the difference. And don’t forget about NEMA and IP Ratings! They should be one of the specifications for your connector.

Standard materials include TPE, PUR, PVC and Nylon. Higher-rated materials include Polyurethane, Polyester Resin and Silicone.

If you need a waterproof molded connector, look for one that has an O-Ring with lock nuts to create the tightest seal possible.

2] Contact Materials Seal the Deal

While the overmold to the connector protects it from the surrounding environment, the right contact materials keep power flowing properly through the connection.

Standard options for molded connector contacts include brass, copper and nickel, which are best for controlled environments and general industrial applications.

If you have environmental concerns, consider gold-plating or copper alloys to deliver increased conductivity in low voltage and corrosive applications.

Molded Connectors with Strain Relief3] Strain Relief is Important for Long-Term Reliability

When molded connectors take abuse from bending and flexing with a piece of equipment, extra strain relief should be used.

A cord grip or wire mesh grip will provide pull-out protection, even in vertical runs or in environments where extreme flexing and movement occur.

4] Little Extras Go a Long Way

Extra options for molded connectors will help you get the long-term performance you need, and reduce maintenance along the way. Here are 3 of the options that at the top of the list.

  • ‘Ribs’ molded into the exterior housing increase grip-surface and reduce slip-offs or the need for special disconnection tools.
  • When the entire connector is molded to the cable, it is extra durable in any environment.
  • LED Lights make it easy to see if the connection is live or not.

M12 molded connector with distribution box5] Distribution Boxes Make Installation and Maintenance Simple

Using distribution boxes simplifies installation and maintenance in environments where multiple connections are needed to control power, conserve space or change components in seconds. Simply terminate multiple connections into one box, and wire the box to the power supply.

Contact Remke Industries to find the perfect molded connector for your application. Our experts are ready to answer your questions. 877-438-8833